We sometimes make silly mistakes when operating microwaves or other appliances. For example, you have entered an incorrect time and want to modify the setting. To have this resolved quickly, resetting the microwave is necessary.
So, how do you reset a GE microwave? We have compiled a detailed and straightforward guideline for you.
Contents
How Does A GE Microwave Work?
Microwaves are elevated radio waves with tiny wavelengths and for the most part, they resemble a small broadcasting system. Indeed, GE microwaves have the same energy as FM, AM, or CB radio but considerably shorter wavelengths.
However, unlike other radio waves transmitting across an extended area, the GE microwave mechanism is self-contained. Its transmitter is a magnetron that transmits signals to the oven sensor when the door is closed and indicates that the oven is on.
The magnetron ceases transmitting the minute you open the door, much as radio would not play once the broadcaster has “signed off.” While the door of the oven is open, no power will be radiated into the cavity.
The microwave radiation is deflected into the steel oven cavity, agitating the nutrient molecules. Because microwaves cannot pass through metal, all energy is trapped inside the oven and converted to heat inside the food.
How Do You Reset A GE Microwave?
You can reset the GE microwave oven even when it hasn’t started or when you set the wrong cooking settings and wish to alter them. Resets are also available when your unit is in the “Control Locked” mode.
This mode works as a security precaution. Power surges, such as nearby lightning can force the oven to cease operating. However, you can quickly reset it.
A soft reset
For a soft reset, hit the ‘Off/Clear’ switch to cancel the process and restart the GE microwave. This way, you can cancel all settings you’ve set.
When the reminder comes on the screen, press it to dismiss the “Your Food is Ready” notification. To switch the “Control Locked” off, tap and hold the “Off/Clear” button for roughly three seconds.
A complete reset
For a complete reset, first, wait a moment after removing the plug from the wall power source. To reset all memory issues with the microwave, plug the equipment back into the power source. If you conduct a factory reset, you will have to reset the time over the day.
To set the times, push the “Clock” switch and spin the dial. To enter, turn the dial for hours and p.m. or a.m., repeat the procedure. Then, hit the “Start” button to reset the clock. Then you’re good to go.
Read More:
Microwave Oven Vs Microwave: Are They Different?
Convection Oven & Toaster Oven-Which Is Best For You?
4 Major Microwave Problems And Ways To Resolve Them
Other frequent microwave problems and their likely causes are listed below.
1. The microwave is still on, but the heat is not rising
It might be due to a malfunctioning magnetron. Broken diodes, burned capacitors, malfunctioning door switches, and inverter failure are all common causes of a burned magnetron.
You can rely on the instructions in this video to better understand how to repair a microwave that’s not heating.
2. The plate within is not spinning
This problem might be because of a faulty motor. In this case, replacing the spinning motor of the plate would solve the problem.
However, if this motor is in good condition, the central control board, control panel, or microwave touchpad might be the source of the problem. In this case, you should ask for help from the professional or call the warranty service.
3. When the microwave is turned on, the bulb within the microwave does not light up
This issue might be due to a faulty bulb socket or poor wiring. To fix it, you need to disassemble the microwave to separate the wires and replace the socket. A new pair of wires and sockets will be necessary in this case.
If the socket and wiring are fine, the controller, which fails to supply power to the bulb socket, needs a check.
4. When the microwave doesn’t operate at all
A broken main fuse is a typical reason for a microwave oven not operating at all. If there is too much current flowing through the main fuse, it will shut off the power.
Whenever this occurs, the fuse is deemed “blown,” In this case, the microwave calls for a replacement fuse to resume regular operation.
In microwave ovens, the primary fuse isn’t the only one. Thermal fuses, thermal protectors, and cavity fuses are also the components that stop the flow of electricity when the microwave gets too hot.
To ensure continuity – the presence of a continuous current channel in the component – use a multimeter to check the fuses:
- First, unplug the microwave power cable.
- Then, place a screwdriver tip across each pair of capacitor terminals to discharge the capacitor before the service. The reason for this is that the high-voltage capacitance in microwaves can still retain a charge long after the power cable has been removed, which is risky.
- After that, disconnect the appliance’s thermal protector or fuse and adjust the multimeter dial to the lowest “Ohms of resistance” setting.
- Now, connect one of the terminals with the black lead and another with the red lead to start measuring.
- If its meter display shows no ‘Ohms of resistance,’ the electrical continuity is good. Otherwise, if it shows no substantial change, the device has blown and needs to be removed.
Conclusion
After reading this article on ‘how do you reset a GE microwave?’, we hope you can quickly reset the microwave’s settings during your cooking process.
We’ve also included 4 common issues you might have with your microwaves and how to solve them detailedly above for more information. However, if these steps are still not working, you’ll need to have them looked at by an expert.
Thanks for reading!
